|
Maximum Safety, Comfort and Efficiency
Eliminates dangerous backfeeds and electrical overloads
AC Power Control Module (ACCM-II) Transfer Switch
Computer controlled load management power switching
Expand your generators range by prioritizing powered circuits
Rated at 200Amps @240v
Nema 3R Enclosure
Flexibility in mounting locations - indoor or outdoor
UL1008 Listed
Included ACCM Air Conditioning Control Module:
The power management system is designed to control six priority loads and up to two air conditioner loads that
are being supplied by power from the home standby system.This power management system goes into a
STANDBY mode and does not control any loads when utility power is present.
The power management system consists of a relay board with 6 relays to control loads rated up to 120 VAC, 20 Amps, 1 hp, and a controle module that has 2 relays for central air conditioner loads.The circuit boards are housed in a NEMA 3R enclosure that is suitable for both indoor and outdoor installations.
Two (2) current transformers monitor generator current at the transfer switch to ensure that the loading of the generator does not exceed 85 percent. Should load exceed 85 percent, the power management system will start to shed loads to keep the generator from verloading.The power management system will add load back once sufficient current is available.
The controle module has a green LED for each relay to indicate when the relays are supplying power to the loads when on generator power.
|
