|
Alternator Design:
Design: Brushless, revolving field, single bearing, 4-pole, drip-proof construction.
Insulation system: Class H per NEMA MG1-1.65 and BS2757.
Temperature rise: At rated load is less than 125 °C at standby rating, per NEMA MG1.22.40, IEEE 115 and IEC 34-1.
Exciter type: The excitation system derived is a self-excited (shunt) system with the voltage directly from the generator set output.
Alternator cooling: Direct drive centrifugal blower.
Rotor: Supported by a pre-lubricated maintenance-free ball bearing.
AC wave form total harmonic distortion: less than 5% total no load to full load.
Exhaust muffler:
Enclosed exhaust
Weather protective sound enclosure
Thick 11 gauge double wall aluminum enclosure with resilient architectural grade powder coat paint
Durable polypropylene base eliminates need for concrete pad
UL Listed, impact resistant, fully colored, automotive grade polypropylene cover with UV stabilizer
All maintenance points are accessible without the use of tools
Under the hood oil dipstick check and fill
Electrical stub-up and side knockouts provided on genset for installation flexibility
Patented, innovative, compact and neighborhood friendly design blends into any residential setting
- Rust proof design
- No exposed fasteners
- Key lockable
- High intake and exhaust to reduce rain ingestion and snow blockage
Control system
POWERCOMMAND 1301 Controller
Electronic control with self diagnostics and generator set protection and safety features included
Automatically identifies power outage and starts generator
Microprocessor control manages generator set operation, fault detection and service diagnostics
Illuminated run/off/auto switch
Convenient access to all connection points
Fully automatic operation
Exhaust muffler
Corrosion resistant stainless steel muffler manifold and body
Low noise |